Tips for setting up the base stations
Before setting up the base stations, make sure to prepare your production area based on the
amount of space you have available.
The minimum area required for room-scale setup is 2 m x 1.5 m (6.5 ft x 5 ft).
Set up your base stations to fit the requirements of your studio space. For the best results, keep
the following things in mind:
§
Make sure the base stations are set up outside the production area and adequately
secured to avoid damage or compromised performance.
§
Each base station has a 150-degree horizontal field of view and a 110-degree vertical field
of view. To maximize the scope of your production area, set up the base stations at least 2
m (6.5 ft) high and 5 m (16 ft) apart. In addition, make sure each base station is tilted down
between 30 and 45 degrees.
§
For optimal tracking, make sure VIVE Tracker (3.0) is at least 0.5 m (1.6 ft) away from each
base station and that each base station is at least 0.5 m (1.6 ft) high. The height of the base
stations determines how far up or down they need to be tilted to fully cover the production
area.
§
Avoid setting up the base stations under bright lights, which could negatively affect their
tracking performance.
§
After turning on the base stations, do not move or tilt them, as doing so could disrupt
tracking. If you reposition the base stations, you'll need to set them up again.
§
For the first base station you connect, the channel will be set automatically. After
connecting the second base station, you'll need to press the channel button once to set
the channel.
After connecting a third and fourth base station, you'll need to press the channel button on
the third and fourth base stations two and three times, respectively, to set the channel.
19
System setup
Summary of Contents for VIVEMARS CAMTRACK
Page 1: ...User Guide...
