Firmware and Configuration File Prefix and Postfix
23
10. Firmware and Configuration File Prefix and Postfix
Htek IP Phone support Prefix and Postfix for both firmware and configuration files.
Parameter P232 and P233 are for Prefix and Postfix for Firmware, respectively. Parameter
P234 and P235 are for Prefix and Postfix for Configuration file, respectively.
Firmware Prefix and Postfix allows device to download the firmware name with the matching Prefix and
Postfix.
In addition, when Parameter P238 (Check New Firmware only when F/W pre/suffix changes) is set to 1,
the device will only issue the Firmware Upgrade request if there are changes in the firmware Prefix or
Postfix.
Below are the firmware BASIC NAMES that are related to UC924P:
If the firmware version is earlier than 1.0.3.73, the firmware BASIC NAMES as follows:
boot_924.bin
img_924.bin
ring4.bin
ring5.bin
ring6.bin
ring7.bin
ring8.bin
Language.tar
hlpres.tar
Service provider can use “hl_” as prefix, and “_1.0.3.70” as postfix, the above files will be changed to:
hl_boot_924.bin_1.0.3.70
hl_img_924.bin_1.0.3.70
hl_ring4.bin_1.0.3.70
hl_ ring5.bin_1.0.3.70
hl_ ring6.bin_1.0.3.70
hl_ ring7.bin_1.0.3.70
hl_ ring8.bin_1.0.3.70
hl_ Language.tar _1.0.3.70
hl_ hlpres.tar _1.0.3.70