Don’t weld the battery without permission.
Such operation may damage the battery and result in leakage and
explosion of the battery.
Avoid that the battery is impacted (such as collusion and
falling, etc).
Such condition may damage the battery case or result in that the
battery leaks or explode.
Please pull off the adapter on the power socket when charging is
not made.
The adapter may get overheated if it is connected with power supply
for a long time. This may cause overheating, deformation and fire.
When the plug of the adapter or wire is damaged, stop using
immediately.
Don’t change the battery unless the plug of the charger is inserted into
the socket completely.
Please ensure that the plug of the adapter is inserted into the
specified power socket.
The adapter plug may be different due to the regions. Please make
confirmation whether the specification of the adapter is consist with the
specification of electric appliances in your region. Otherwise, this may
cause overheating of the equipment, electric shock, fire, chemical
leakage inside the battery, explosion and other serious consequences.
Do not touch the electric wire with wet hands.
It is possible to cause electric shock when touching the electric wire
with wet hands. When pulling out the electric wire, hold the electric wire
head rightly to pull out the wire. Don’t pull off the electric wire directly.
Otherwise, the electric wire may be broken, causing electric shock and
fire.
Forbid dip the product into water caught in rain.
If the case contact with any liquid, please wipe it dry immediately. If
water or other liquid enters the inside of the instrument, please power
off the power supply at once. Continuous use may result in product
damage.
Clean the dust on the adapter plug and the data line.
When it is exposed to dusty and dump environment for a long time, the
dirt surrounding the electric equipment will accumulate moisture. This
may cause short circuit and fire.
Please use the original adapter of the company to charge the
product.
The use of non-original power supply accessories may cause
equipment overheating, electric shot, fire, and leakage of chemicals
inside the battery,explosion and other serious consequences.
Don’t use abradant, isopropanol or solvent to clean the enclosure
of the device.
Such operation may cause the product case to be damaged.
www.xintest.com.cn
5
www.xintest.com.cn
6
