28.25.14−001−89695785−2020 PS
3 из 12
T a b l e 2 - Recirculator Operation Conditions
Parameter
Value
Type of climatic design as per GOST 15150-69
UHL4.2
(moderate
or cold climate
)
Allowable ambient temperature , ºС
+5…+35
Relative air humidity at t = 25 ° C,%, no more
80
Atmospheric pressure, kPa
84…107
Type of atmosphere according to the content of corrosive agents as per GOST
15150-69
II
3
The Recirculator Set
3.1
The Delivery set is shown in The Table 3
T a b l e 3 - Delivery set
№
Description
Quantity, pcs
1
«Advansys-15.2U» Bactericidal Air Recirculator-Irradiator.
Closed/opened type
1
2
Operation Manual (Technical Passport)
1
3
Power cord
1
4
Hangers (Brackets)
2
5
Safety glasses
1
3.2
The delivery set may include an extra components and documents if so stipulated in the
Contract.
4
The principle of operation
The recirculator structurally consists of: germicidal lamps placed on the front wall of the mounting
panel. With the help of a fan, air flows through light-shielding louvers and filtering elements of class
G1 into the reactor chamber, where it is disinfected by receiving the necessary dose of UV radiation
when moving along the bactericidal lamp.
6
Pre-start procedure
1.
Remove the Recirculator from the shipping container. Let it stay at room temperature for 2-3
hours before switching it ON if the Recirculator has been transported at sub-zero
temperatures.
2.
Install the Recirculator on an open surface or fix it vertically on the wall (after removing the
stand) by fixing hangers (brackets) so that the lowest part of the device is at least 0.7 m
above the floor. The hangers are to be pre-screwed to the body with two screws.
3.
The recirculator must be placed in the room so that air intake and discharge are unimpeded.
4.
Plug the power cord into a 230V socket. Turn on the "Network" switch. Check the operation
of the lamps by the indicator (the HTL-ADVANSYS inscription will light up in blue).
5.
The room surfaces should be treated in accordance with SanPiN 2.1.3.2630-10 before
starting the treatment of room air using the recirculator.
6.
The germicidal lamps operating time is recorded in “The Germicidal lamps operation time
Log”. If the device has an operating hour meter, the operating time is monitored visually.
