LP-719 Rev. 000 Rel. 000 Date 6.25.20
57
J. Technical Menu - Access and Navigation
To access advanced setup and troubleshooting parameters, it is necessary to enter the Technical Menu. The Technical Menu includes a number
of Quick Access Menus which allow easy access to commonly used parameters. See K. Technical Menu - Menu Structure.
The Quick Access Menu option, “MENU”, provides access to all parameters. See L. Technical Menu - Complete Menu.
Instructions on how to access and change the menus are provided below.
2
“+”
and
2
“-”
buttons
access and
modify
parameters.
8 “+” OK
button
stores parameter
settings.
8 “-”
button
exits the
parameters.
2
8
The menu and parameter numbers are shown on the display.
CAUTION!
THE MENUS RESERVED FOR QUALIFIED TECHNICIANS
MAY ONLY BE ACCESSED AFTER ENTERING THE ACCESS CODE.
To access the Menus proceed as follows (in this example: Parameter
2.3.1)
1.
Simultaneously press the
“+”
and
“-”
buttons for 5 seconds.
The display shows
222.
2. Press the
“+”
button to select
234,
the service code.
3. Press the
OK
button.
The display
shows the first “quick setting”
PCB.
4. Press the
“+”
button until
the
display shows
MENU.
5. Press the
OK
button.T
he display
shows menu
0
.
6. Press the
“+”
button to select
menu
2
.
7. Press the
OK
button t
o access the
menu
. The display shows sub-menu
20
.
8. Press the
“+”
button to select the
sub-menu
3
.
9. Press
OK
t
o access the sub-menu
.
T
he display shows parameter
231
.
10. Press
OK
to access the
parameter. T
he display shows
the
current parameter value. In this
example,
100
.
11. Press the
“+”
or
“-”
buttons to
select a new value.
In this example,
96
.
12. Press
OK
to save the change,
or press the
“-”
button
to exit
without saving.
In this example press OK.
After making changes, press the
“-”
button
until the normal display
screen is restored.
2
8
