background image

Manufacturer’s Warranty

It is expressly agreed that there are no warranties, expressed or implied, made by either the

Salesman, Dealer, or HTP America, Inc. on products or parts furnished hereunder, except the

Manufacturer’s Warranty against defective materials or workmanship as follows:

HTP America, Inc. warrants each new welding machine to be free from defects in material and

workmanship under normal use and service for one year after delivery to the original purchaser.

HTP America, Inc. will repair and replace, at its factory, any part or parts thereof, products to be

returned to HTP America, Inc. with transportation charges prepaid and which its examination shall

disclose to its satisfaction to have been thus defective.  This warranty being expressly in lieu of all

other warranties, expressed or implied, and all other obligations or liabilities on its part and it neither

assumes nor authorizes any other person to assume for it any other liability in connection with the

sale of its machines.

This warranty shall not apply to any welding machine which has been repaired or altered by

unauthorized service departments in any way so as in the judgment of HTP America, Inc. to affect

its stability and reliability, nor which has been subjected to misuse, negligence or accident.

HTP America, Inc. shall not be liable in any event, unless HTP America, Inc. receives notice of

alleged breach of warranty within not more than 30 days after the discovery, actual or construction

alleged breach of warranty specifying the claimed defect.

HTP America, Inc. has reserved the right to make change in design or add any improvements to its

products at any time without incurring any obligation to install same on equipment.

This warranty is void unless warranty card is sent to HTP America, Inc. within 15 days from date 

of purchase.

Note:

Exclusions to Warranty:

1. The Tig Welding Torch is warranted for a period of ninety 

(90) Days against defects in material and workmanship.

2.  The tungsten, collet, collet body, ceramic nozzles are 

consumable items, WHICH CARRY NO WARRANTY.

Summary of Contents for Invertig 130 DC/HF













Reviews: