WenZhou ZhengBang Electronic Equipment Co., Ltd
ZB4050LS Rev 1.1
23
Fig.4-27 Edit Angle
4.
Add other Component Coordinates
：
Refer to step 1, 2, and 3 above to add and edit all component mounting coordinates.
5.
Order Optimization
：
After all the components have been edited, click “Optimize” to optimize placement order automatically,
according to the coordinate position. Click “Save” in the lower right corner to save the latest CSV coordinate file.
6.
Component Analysis
；
Station Allocation
：
Refer to 4-2-2, steps 3, 4, and 5 to complete component analysis and station assignment.
4-3 Mark Edit
4-3-1 Mark Position Method
Select "Edit - Mark" to enter the identification configuration, click "Mark1 - Edit" to pop up the coordinate editing box, move the
coordinates to Mark1, and click "Confirm" to save Mark1.
Fig.4-28Edit Mark1
Click "Mark2 - Edit" to pop up the coordinate edit box, move the coordinates to Mark2, and click "Confirm" to save Mark2.
Fig4-29 Edit Mark2
