Introduction
1
Section
1.7 - Button function instructions and button
operation
：
Press to enter SET mode when the transmitter is in normal displaying mode;
Press to get back to normal displaying mode when the transmitter is in SET mode.
：
Add value (switch symbol)
：
Reduce value
：
Press to save temperature value and enter humidity SET mode if the transmitter
is in temperature SET mode ;
Press to save humidity value and enter normal displaying mode if the transmitter
is intemperature SET mode .
The basic flow of the HE500A setting interface is:
Temperature deviation value setting --> humidity deviation value setting --> °C / °F
switching setting.
1, HE500A power-on display instructions
The device is powered on normally and fully displayed as shown in Figure (1). After HE500A,
the version number
【
V4.4
】
is displayed, as shown in Figure (2). After normal startup, it
enters the normal measurement state, and the screen displays the temperature value and
temperature symbol. The lower row shows the humidity value and humidity symbol, as
shown in Figure (3).
1.7.1 - Button function instructions
1.7.2 - HE500A button operation instructions
Figure 1
Figure 2
Figure 3
5
