UPS5000-E-(40 kVA-320 kVA)
User Manual
4 User Interface
Issue 10 (2015-09-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
131
Corresponds to signal of the input dry contact DI_3 on the MUE07A.
MUE07A DI_4
Corresponds to signal of the input dry contact DI_4 on the MUE07A.
MUE07A DI_5
Corresponds to signal of the input dry contact DI_5 on the MUE07A.
Intelligent Power Supply Settings
Intelli. Power
screen.
Figure 4-50
Intelli. Power screen
The default value of
Intelligent power
is
Disable
. If you select
Enable
, intelligent power
supply parameters are displayed, as shown in
Figure 4-51
Intelligent power supply parameters
Intelligent power
Intelligent power supply mode is applicable when a D.G. is configured, which enables
D.G. power supply when an outage occurs. For details about the installation and
configurations, contact Huawei technical support.