Figure 5-125
Installed shielded Ethernet connector
Step 4
To remove an Ethernet connector, press the locking key and pull out the connector, as shown
in
Figure 5-126
Removing a shielded Ethernet connector
----End
5.1.5.3.2 Installing an Unshielded Ethernet Connector
Procedure
Step 1
Hold the male and female connectors, with the male connector facing the female connector, as
shown in
AP4050DN-E
Hardware Installation and Maintenance Guide
5 Appendix
Issue 05 (2018-02-02)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
104