AP8130DN
Product Description
2 Hardware Structure
Issue 02 (2014-12-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
Color
Status
Description
Green
Blinking
The AP has STAs connected to the 2.4 GHz
radio and is transmitting data. The indicator
blinks more quickly when more data is
being transmitted.
Yellow
Blinking
The AP has STAs connected to the 5 GHz
radio and is transmitting data. The indicator
blinks more quickly when more data is
being transmitted.
Yellow/green
Blinking
alternatively
The AP has STAs connected to both the 2.4
GHz radio and 5 GHz radio. The indicator
blinks more quickly when more data is
being transmitted.
Table 2-4
Description about the Wireless indicator (Wireless bridge indicator)
Color
Status
Description
Yellow/green
Off
The AP is not transmitting or receiving data
or the signal strength is extremely low.
Blinking once every
2s (0.5 Hz)
The AP is transmitting or receiving data
normally, and the signal strength is low.
Blinking green once
every 0.25 seconds
(4 Hz)
The AP is transmitting or receiving data
normally, and the signal strength is medium.
Steady on
The AP is transmitting or receiving data
normally, and the signal strength is high.
When the WDS/Mesh function is enabled on an AP, the blinking frequency of its Wireless indicator
indicates the receive signal strength on the WDS/Mesh connection by default. After you connect an AP
to a WDS/Mesh network, you can run the
wifi-light
{
signal-strength
|
traffic
} command on the AC to
make the Wireless indicator blinking frequency indicate receive signal strength or service traffic rate.
wifi-light
signal-strength
:
If the Mesh function is enabled on the AP, the blinking frequency of the Wireless indicator reflects
the weakest signal strength of all neighboring APs.
If WDS is enabled on an AP, the blinking frequency of the Wireless indicator reflects the strength of
signals received from a WDS AP.
If the AP works in leaf mode, the blinking frequency of the Wireless indicator reflects the strength of
signals received from a middle AP.
If the AP works in middle mode, the blinking frequency of the Wireless indicator reflects the
strength of signals received from a root AP.
If the AP works in root mode, the blinking frequency of the Wireless indicator reflects the weakest
signal strength of middle APs.
wifi-light
traffic
: allows the Wireless indicator to reflect the service traffic volume on the radio.
When an AP functions as a Fat AP, the Wireless indicator of the AP can not reflect the signal strength.
