26
by the body during the device operation. The SAR value is determined in vitro at the maximum power,
but the actual SAR level of the device while operating can turn out well below the maximum value. This
is because the device engages only the power required to receive the network signal.
The SAR limit approved in the USA and Canada is 1.6 W/kg averaged over one gram of body tissue. The
highest value for this device type, informed by the FCC and IC on testing for use at the ear was 1.340 W/
kg, and on proper carrying along the body – 0.505 W/kg and when using the Wi-Fi point - 1.210 W/kg
The SAR limit approved in Europe is 2.0 W/kg averaged over ten grams of body tissue.
The highest SAR value for this device type when tested for use at ear is 1.08 W/kg, and on proper
carrying along the body – 0.701 W/kg.
FCC Norms
This equipment has been tested and found to comply with the limits for Class B digital devices pursuant
to Part 15 of the FCC Rules. These limits have been developed to ensure the appropriate protection from
harmful interference in living spaces.
This equipment generates, uses and can radiate radio-frequency energy, and if not used in accordance
with the instructions, may cause harmful interference to radio communication. However, there is no
guarantee that interference will not occur in a certain device. In case this equipment causes interference
for radio or TV broadcasting which can be determined on turning the equipment on and off, the user is
advised to try and remove interference by one of the following measures:
Reorient or relocate the receiving antenna.
-
Increase the distance between the equipment and the receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
-
connected.
Contact the dealer or
-
the experienced radio/TV specialist.
