Name
Type
Quantity
Description
Audio
input port
-
1
Used to connect an audio input device such as a
microphone to the Atlas 500.
Figure 2-5
Audio input cable
NOTE
The audio input cable and devices are not included in
the accessory package, and need to be purchased by
customers themselves.
HDMI port
-
1
Used to connect to a monitor through an HDMI
cable for video output.
NOTE
The HDMI cable is not included in the accessory
package, and needs to be purchased by customers
themselves.
Power
socket
-
1
Used to connect to the power supply system
through a 2-pin DC power cable. One end of the
cable is a 2-pin DC input terminal, and the other
end is open. Users can prepare cables based on
site requirements. The 2-pin DC input terminal
adopts a foolproof design. If the positive and
negative poles are reversely connected, the
device cannot be powered on. The Atlas 500
installation accessory package provides a 2-pin
power cable terminal. The DC power cable
specifications must be 1.5 mm
2
or 16 AWG
(recommended) or smaller.
Figure 2-6
Atlas 500 power cable
Ground
terminal
-
1
Used to connect one end of the PGND cable to
the ground terminal on the device and the other
end to the ground point on the cabinet or
workbench. A Phillips screwdriver and M4
screws are required.
The PGND cable needs to be prepared by the
customer, and a 16 AWG to 18 AWG yellow and
green cable is required.
Huawei Atlas 500
Technical White Paper
2 Hardware
Issue 03 (2019-08-05)
Copyright © Huawei Technologies Co., Ltd.
9
