background image

 Chapter 5 Wireless

B222s User’s Guide

57

5.6  Scheduling Screen 

Click Network Setting > Wireless > Scheduling to open the Wireless LAN Scheduling screen. 
Use this screen to configure when the LTE Device enables or disables the wireless LAN. 

Figure 29   

Network Setting > Wireless > Scheduling

The following table describes the labels in this screen.

5.7  Technical Reference

This section discusses wireless LANs in depth. For more information, see the appendix.

Table 16   

Network Setting > Wireless > Scheduling

LABEL

DESCRIPTION

Wireless LAN 
Scheduling

Select Enable to activate wireless LAN scheduling on your LTE Device.

WLAN status

Select On or Off to enable or disable the wireless LAN.

Day

Select the day(s) you want to turn the wireless LAN on or off.

Between the 
following times

Specify the time period during which to apply the schedule.

For example, you want the wireless network to be only available during work 
hours. Check Mon ~ Fri in the day column, and specify 8:00 ~ 18:00 in the time 
table.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to restore your previously saved settings.

Summary of Contents for B222s




































































































































































































































































Reviews: