3
To remove E220, use the hardware deleting
function of the Windows system to stop E220
and then pull it out.
1)
Double-click
on the status area
of the desktop; the "Safely Remove
Hardware" prompt will be displayed.
2)
Stop the E220 hardware "USB Mass
Storage Device".
3)
At the prompt, pull E220 out.
Introduction to the E220
Manager Interface
1. Accessing the E220
Manager Interface
Double-click
on the desktop to start the
E220 Manager.
If the system prompts you to enter a PIN, enter
the correct one.
2. Introduction to the Icons
/
: Connect/Disconnect the network
connection.
: Open the default browser of the OS.
: Access the SMS window.
: Access the contacts window.
Internet Service
1. Network
Connection
Settings
To create a new profile:
1)
Select
Settings
>
Network
Connection Settings
.
2)
Click
New
.
3)
Enter the profile name and the
parameters.
4)
Click
Save
.
Note
:
For the detailed parameters, consult the
local network operator.
2. Connecting to the Internet
1)
Click
to connect to the
network.
When the connection is created, the current
connection information will be displayed on the
right pane of the window, including connect
duration, data volumes, received and sent
volumes, rate and the top rate.