background image

 

6

 

Safety Information

 

Please read the safety information carefully to 
ensure the correct and safe use of your wireless 
device. 

General Recommendations 
for Use 

Always handle your wireless device with care 
and keep it in a clean and dust-free place. Do 
not expose your wireless device to open flames 
or lit tobacco products. 

y

 

Always keep your wireless device dry. 

y

 

Do not drop, throw or try to bend your 
wireless device. 

y

 

Do not paint or scratch your wireless 
device. 

y

 

Do not attempt to disassemble your 
wireless device. Doing so will void 
warranty. Only authorized personnel are 
allowed to do so. 

y

 

This product requires a minimum distance 
of 1.5 cm from the body when in 
operation. 

y

 

Keep your wireless device in normal 
temperature. Your wireless device can 
only operate between -5ºC and +55 ºC. 

y

 

Use approved accessories only. Do not 
connect your wireless device to any 
incompatible products. 

Obey Laws and Regulations 

Do not operate your wireless device where it 
may be unsafe to do so or where you are 
required not to do so. 

To deactivate your wireless device, close all 
applications using the wireless device first and 
then remove the wireless device from your PC. 

Obey all local laws, regulations, rules, orders, 
signs and notices while using the wireless 
device. Signs about the use of mobile phones 
should also be obeyed as referring to other 
wireless equipment including wireless devices. 

Deactivate in Explosive Areas 

Deactivate your wireless device where the air is 
potentially explosive. It is rare, but your PC 
could generate sparks. 

Deactivate in Blasting Areas 

Deactivate your wireless device where blasting 
is in progress. Remote-controlled RF devices 
are often used at construction sites to set off 
blasting. 

Summary of Contents for E172











Reviews: