22
7.
Check that the network adapter of your client operates properly.
8.
If the problem persists, please consult your service provider.
What can I do if a client cannot access the WLAN?
1.
If interference seems to be the problem, adjust the position of the E5 or move it to a
more favorable location.
2.
Check and record the following settings for your client and your E5: SSID, WEP type,
and key. The SSID of the client must be set to ANY or to the same value as that of the
E5. The WEP type and key of the client must be the same as that of the E5. Change
the settings as needed.
3.
Check whether the WLAN MAC Filter function is enabled on the E5. If the function is
enabled, ensure that all relevant parameters are set correctly. See WLAN MAC Filter on
the web management page for more information.
What can I do if I forgot the default IP address of the web management page?
Restore the factory defaults and enter
http://192.168.1.1
in the address bar.