10 Settings and Information Query
HUAWEI
44
Manual Network Searching
After you select connection types, you can search for a network manually,
and register to the carrier of the Data Card.
1.
Click
to display the
Setting
interface.
2.
Select the
Network
tab page to display the
Network
dialog box.
3.
Click
Manual Choose Network
, and click
Search
to display a Prompt
dialog box.
4.
Click
Yes
to display
the results of the carriers in the
Network Search
list.
5.
Select the related carrier in the
Network Search
list.
6.
Click
Register
to finish settings.
Connection Settings
You can create, modify, and delete the settings of network connection, such
as configuring network names, verifying users, and setting IP addresses. You
can perform the following operations:
Create Connections
You can make a new network connection.
1.
Click
to display the
Setting
interface.
2.
Select the
Connection
tab page.
3.
Click
New
and configure network profile names, verify users, and set IP
addresses and so on.
4.
Click
Advanced
to set authentication protocol, DNS, and WINS.
5.
After advanced settings, click
OK
.
6.
After connection settings, click
Save
; you can click
Cancel
to cancel
your creation.
All the connection setting parameters and their descriptions are listed below:
Parameter
Description
Profile name
The profile name of the connection.
