EchoLife BM325
User Guide
2 Installing the BM325
Issue 01 (2008-05-31)
Huawei Proprietary and Confidential Copyright ©
Huawei Technologies Co., Ltd
2-3
z
If
is not displayed on the system tray, perform the following steps:
Step 1
Quit the BWA Partner.
Step 2
Disconnect the BM325 or the connector of the USB cable from the PC.
----End
z
If
is displayed on the system tray, perform the following steps:
Step 1
Double-click
on the system tray. The system prompts "Safely remove hardware."
Step 2
Stop running the corresponding hardware of the BM325 on the device manager.
Step 3
Disconnect the BM325 or the connector of the USB cable from the PC after the system
prompts that you can remove the hardware safely.
----End
2.3 Installing the BWA Partner
The BWA Partner is the program used to configure the BM325 parameters. To install the
BWA Partner, do as follows:
Step 1
Power on the PC.
Step 2
Use a USB cable to connect the BM325 to the PC.
Step 3
The system prompts that new hardware is found and prompts you to install the BWA
Partner.
Step 4
Install the BWA Partner according to the prompts.
Step 5
When you finish installing the BWA Partner, it displays
on the system tray.
----End
After you install the BWA Partner, you need to set up the network connection manually.
For details, see section 4.3 "Connecting and Disconnecting Network."
2.4 Uninstalling the BWA Partner
You can uninstall the BWA Partner by two methods:
From the Program
Step 1
Quit the BWA Partner.
Step 2
Choose
Start
>
All programs
.
Step 3
Find the BWA Partner, such as
BWA Partner
.
Step 4
Select
Uninstall
.
Step 5
Uninstall the BWA Partner according to the prompts.
----End