7
Logging in to the Web Configuration Window
Step 1 Set the IP address of the PC in the same subnet as the management
IP address of the GPON terminal.
Step 2 Enter the management IP address of the GPON terminal in the
address bar of Internet Explorer and press
Enter
.
The login window is displayed.
Step 3 In the login window, select your preferred language, enter the user
name and password (printed on the nameplate of the device.),and
click
Login
. After the password is authenticated, the Web
configuration window is displayed.
NOTE
You can find the default management IP address on the nameplate
of the device.
NOTE
-If you do not perform any operations after logging in to the
system for five minutes, you will exit the system and the system
automatically returns to the login interface.
-The system will be locked if you input incorrect user name and
password three consecutive times. One minute later, it will be
unlocked.
-Change the initial password after logging in to the web page.
