Manual do Usuário - EchoLife
ET325 IP Phone
4 Guia de Configuração
54
Field
Description
Anonymous
Call Rejection
The default setting is
No
. If it is set to
Yes
, the
anonymous call will be rejected.
Auto Answer
The default value is
No
. If it is set to
Yes
, the ET325 will
automatically switch to the speaker to answer the
incoming call.
Allow Auto
Answer by Call-
Info
The default setting is
No
. If it is set to
Yes
, the auto
answer depends on the Call-Info in the SIP message.
This feature needs the support of IP-PBX.
Turn off
Speaker on
Remote
Disconnect
The default setting is
No
. If it is set to
Yes
, the speaker
will turn off, and the phone will go back to the idle status
after the other party of the call hangs up.
Check SIP
User ID for
Incoming
INVITE
The default setting is
No
. If it is enabled and the server
supports this feature, the phone will check the user ID
for the incoming call before processing it.
Refer-To Use
Target Contact
The default setting is
No
. If it is enabled and the server
supports this feature, the phone will check the "Refer-
To" header to process the call.
Disable
Multiple Media
Attribute in
SDP
The default setting is
No
. When it is set to
Yes
, the
phone ignores the multiple media attributes in the SDP.
The parameter is used when the other party uses a
video phone.
Preferred
Vocoder (in list
order)
The ET325 supports up to 7 different Vocoder types
including G.711(a/µ)(PCMU/PCMA),GSM,G726-
32k,G.723.1,G.729A/B,G.722 (broadband) and iLBC.
Configure Vocoders in a preference list that is in the
same preference order as the SDP message. Enter the
first Vocoder in this list by choosing the appropriate
option in
Choice 1
. Similarly, enter the last Vocoder in
this list by choosing the appropriate option in
Choice 8
.
In
Choice 1
,
PCMA
is selected by default and
recommended.
