Huawei Technologies Proprietary
33
Table 3-22 Parameters in the
Firewall
Configuration
page
Item
Configuration
Firewall
Select
Enable
to enable the function of firewall.
Select
Disable
to disable the function of firewall.
Intrusion Detection
It is configurable only when firewall is enabled.
Click
Change State
to take effect the configuration. The IP Filter
is configurable only when the function of firewall is enabled. IP filter
restricts access to your network from the Internet. You may create IP
filter rules based on IP addresses, ports and protocols to control
access. You can click
IP Filter
and click
New
to add IP Filter rules.
Table 3-23 shows the parameter explanation of the
IP Filter-New
page.
Table 3-23 Parameters in the
IP Filter-New
page
Item
Configuration
Source /
Destination
Address
Enter the range of source IP address and that of
destination IP address.
Protocol
Select a protocol from the drop-down menu.
Destination Port
Enter the range of destination port number.
Direction
Select
Allow
or
Deny
from the drop-down menu.
II. Save
Click
Apply
to save the settings in the RAM.
Click
Cancel
to quit configuration without saving the
changes.
