EchoLife HG552a Home Gateway
User Guide
FAQs
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-3
Step 5
Step 6
Che
successfully, perform further checks as
,
your network service provider.
Step 7
Web browser is correctly configured. Take the
ample. To
igured, do as
2.
box, ensure that
Use a proxy server for your LAN (These settings will not apply
.
ervice provider.
t access the
Intern
Step 1
d.
nual of the terminal.
d
er the wireless network adapter supports the 802.11b and 802.11g protocols.
network adapter is not properly installed. In this case, re-install the driver for the network
adapter of the computer.
For details about how to set the parameters, see the description of the PPP dialing
software.
Ensure that you have entered the correct user name and user password that are required
by the PPP dialing software.
The user name and the user password are provided by your network service provider.
ck whether you can use the PPP dialing software to dial successfully.
If you cannot use the PPP dialing software to dial
follows:
1.
Stop the PPP dialing software and then power off the terminal. After five minutes
power on the terminal and use the PPP dialing software to dial again.
2.
Restore the default settings of the terminal.
If the problem persists, contact
Check whether the proxy server of the
Internet Explorer installed on a computer that runs Windows XP as an ex
check whether the proxy server of the Web browser is correctly conf
follows:
1.
Start the Internet Explorer.
Choose Tools > Internet Options.
In the
Internet Options
dialog box, click the
Conne
3.
ctions
tab.
4.
In the Local Area Network (LAN) settings group box, click LAN settings.
5.
In the
Proxy server
group box of the
Local Area Network (LAN) Settings
dialog
to dial-up or VPN connections)
is not selected.
Step 8
Try to access multiple other Web sites to check whether the terminal can access
If the terminal still cannot access other Web sites, contact your network s
8.3 What can I do if the terminal canno
et through a wireless network adapter?
Ensure that the power cables and telephone lines of the terminal are properly connecte
Step 2
Check whether the WIFI indicator of the terminal is on.
If the WIFI indicator is off, you can infer that the wireless local area network (WLAN)
function of the terminal is disabled. In this case, enable the WLAN function.
For details about how to enable the WLAN function, see the ma
Step 3
See the description of the wireless network adapter that is installed on the computer an
check wheth
