6 Configuring Frequently Used Functions
6-3
6.3 Using the Home Storage Function
Function Overview
The terminal supports the home storage function. Portable storage devices, such as USB
flash drives and portable hard disks, can be connected to the USB port on the terminal. If
your portable storage device is a card reader, insert the storage card
(
for example CF, SD,
and MMC card
)
in the card reader, and then connect the card reader to the USB interface
of the terminal. The hard disks of the NTFS format support read only, cannot write.
Configuration Example
To access a portable storage device, do as follows:
1.
2.
3.
4.
5.
Figure 6-1
Step 1
Enable the FTP server. To configure parameters of the FTP server, do as follows:
Log in to the Web-based configuration utility.
Choose
Advanced Setup
>
FTP
in the navigation tree.
Select
Enabled
.
Enter the name and password of the FTP in the
UserName
and
Password
text boxes.
Enter the password again in the
Confirm Password
text box.
Click
Save/Apply
to save the settings.
Step 2
Connect a portable storage device to the USB port on the terminal. For the connection
method, see the following figure.
Home storage connection
After connecting the cables, you can access the portable storage device through the three
methods as follows.
