Step 2
In the navigation tree on the left, choose
Basic
>
LAN
.
ox.
ption
drop-down combo box.
Step 8
Click
Submit
to save the settings.
Step 3
Select the
WLAN
page.
Step 4
Enter the new wireless network name in the
SSID
text box.
Step 5
Select
WPA-PSK
from the
Security
drop-down combo box.
Step 6
Enter the new access password in the
WPA pre-shared key
text b
Step 7
Select
TKIP
from the
WPA encry
5.4
Changing the IP Address Used for Logging
In to the Web-Based Configuration Utility
To make the login IP address easy to remember, you can change the IP address after
utility.
the navigation tree.
the
IP address
text box. Then, enter a
C
logging in to the Web-based configuration
To change the IP address, do as follows:
Step 1
Choose
Basic
>
LAN
in
Step 2
Select the
DHCP
page.
Step 3
Enter a new IP address as desired in
subnet mask in
Subnet mask
.
Step 4
lick
Submit
to save the settings.
the computer can access the Web-based configuration utility.
To log in to the Web-based configuration utility after you change the IP
address successfully, you need to launch the Internet Explorer, and then
enter the new IP address in the address bar. Ensure that the IP address of
the computer is in the same network segment as that of the HG620 so that
5.5
Restoring Default Settings
You can quickly restore the default settings of the HG620 by pressing the RESET
button on the rear panel. To restore the default settings, press and hold the RESET
button for over six seconds after the HG620 is powered on, and then release the button.
In addition, you can restore the default settings of the HG620 through the Web-based
configuration utility. To restore the default settings through the Web-based
configuration utility, do as follows:
ation utility, and then choose
Step 1
Log in to the Web-based configur
> Device
in the navigation tree to
Maintenance
display the reboot page.
Step 2
Click
Factory Default Settings
.
14
