You can run the
display traffic table ip
command to query the traffic profiles existing
in the system. If the traffic profiles existing in the system do not meet the requirements,
you need to run the
traffic table ip
command to add a traffic profile.
The profile ID is 9, no rate limitation in the upstream and downstream directions, the
priority is 6, and packets are scheduled according to the priority carried.
huawei(config-if-gpon-0/1)#
quit
huawei(config)#
traffic table ip index 9 cir off priority 6 priority-policy
tag-In-Package
8.
Create service ports.
Set the service port indexes to 3 and 4, SVLAN ID to 200, GEM port ID to 2, and
CVLAN ID to 20. Use traffic profile 9.
huawei(config)#
service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi-
service user-vlan 20 rx-cttr 9 tx-cttr 9
huawei(config)#
service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi-
service user-vlan 20 rx-cttr 9 tx-cttr 9
9.
Configure the queue scheduling mode.
Use the 3PQ+5WRR queue scheduling. Queues 0-4 adopt the WRR mode, with the
weights of 10, 10, 20, 20, and 40 respectively; queues 5-7 adopt the PQ mode.
NOTE
Queue scheduling is a global configuration. You need to configure queue scheduling only once on
the OLT, and then the configuration takes effect globally. In the subsequent phases, you do not need
to configure queue scheduling repeatedly when configuring other services.
huawei(config)#
queue-scheduler wrr 10 10 20 20 40 0 0 0
Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map
queues 0-7 respectively.
huawei(config)#
cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6
6 cos7 7
For the service board that supports only four queues, the mapping between 802.1p
priorities and queue IDs is as follows: priorities 0 and 1 map queue 1; priorities 2 and
3 map queue 2; priorities 4 and 5 map queue 3; priorities 6 and 7 map queue 4.
10. Save the data.
huawei(config)#
save
l
Configure an optical network terminal (ONT) on the Web page.
NOTE
Some voice parameters cannot be configured on the Web page but can be configured by importing an
XML configuration file. For details about how to import an XML configuration file, see
Guide on the XML Configuration File (on the Web Page)
.
1.
Log in to the Web configuration window.
(1) Configure the IP address of the PC network adapter to be in the same network
segment as the IP address of the local maintenance Ethernet port of the ONT
(default:
192.168.100.1
).
(2) Open the Web browser, and enter the IP address of the local maintenance Ethernet
port of the ONT.
(3) On the login window, enter the user name (default:
telecomadmin
) and password
(default:
admintelecom
) of the administrator. After the password authentication
is passed, the Web configuration window is displayed.
2.
Configure parameters of the voice WAN port.
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-126
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)