Huawei EchoLife HG8240 Service Manual Download

Page: 137 / 358

Result

The user can watch program1 on TV.

3.3 Configuration by Using OLT Commands

This topic describes how to configure the Internet access service, VoIP service and IPTV service
by using OLT commands.

This topic plans the data in a unified manner for connecting to the OLT in the FTTH GPON
access mode for various example networks. The subsequent examples are configured based on
the following data plan.

3.3.2 Configuring the GPON FTTH Layer 2 Internet Access Service on the OLT CLI

The OLT is connected to the remote ONT through a GPON port to provide users with the high-
speed Internet access service.

3.3.3 Configuring the GPON FTTH Layer 3 Internet Access Service on the OLT CLI

The OLT is connected to the remote ONT through a GPON port to provide users with the high-
speed Internet access service.

3.3.4 Configuring the GPON FTTH VoIP Service (H.248-based) on the OLT CLI

The OLT is connected to the remote ONT through a GPON port to provide users with the IP-
based high-quality and low-cost VoIP service.

3.3.5 Configuring the GPON FTTH VoIP Service (SIP-based) on the OLT CLI

The OLT is connected to the remote ONT through a GPON port to provide users with the IP-
based high-quality and low-cost VoIP service.

3.3.6 Configuring the GPON FTTH Layer 2 Multicast Service on the OLT CLI

The OLT is connected to the remote ONT through a GPON port to provide users with the IPTV
service.

3.3.7 Configuring the GPON FTTH Layer 3 Bridge Multicast Service on the OLT CLI

The OLT is connected to the remote ONT through a GPON port to provide users with the IPTV
service.

3.3.1 Data Plan

Data Plan

Table 3-4

provides the unified data plan for configuring the HSI, IPTV, and VoIP services in

an FTTH network.

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-99

Summary of Contents for EchoLife HG8240







































































































































































































































































































































































Search results

Summary of Contents for EchoLife HG8240

Reviews:

Related manuals for EchoLife HG8240

Brands by name

Popular brands

Huawei EchoLife HG8240, Service Manual

Search results

Summary of Contents for EchoLife HG8240

Reviews:

Related manuals for EchoLife HG8240

Brands by name

Popular brands