Huawei EchoLife HG8240 Service Manual Download

Page: 349 / 358

If the ping test fails,

The result

is displayed as

FAIL

, that is, the ONT cannot interwork

with the device with the destination IP address.

5.10.4 Log

In the navigation tree on the left, choose

System Tools

Log

. In the pane on the right, click

Download log File

. In the dialog box that is displayed, click

Save

, specify the path of saving

the log file, and save the file to the local disk, as shown in

Figure 5-37

Log

5.10.5 Configuration File

In the navigation tree on the left, choose

System Tools

Configuration File

. In the pane on

the right, click the button as required, as shown in

Figure 5-38

Configuration File

Click

Save Configuration

to save the configuration file to the flash memory. This prevents

data loss due to the restart of the device.

Click

Download Configuration File

. In the dialog box that is displayed, click

Save

, specify

the path of saving the configuration file, and then back up the file to the local disk.

Click

Browse

following the

Configuration File

text box. In the dialog box that is displayed,

select the configuration file to be uploaded. Click

Upload Configuration File

to upload

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual

5 Web Page Reference

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

5-41

Summary of Contents for EchoLife HG8240







































































































































































































































































































































































Search results

Summary of Contents for EchoLife HG8240

Reviews:

Related manuals for EchoLife HG8240

Brands by name

Popular brands

Huawei EchoLife HG8240, Service Manual

Search results

Summary of Contents for EchoLife HG8240

Reviews:

Related manuals for EchoLife HG8240

Brands by name

Popular brands