background image

Limited Warranty 

Subject to the exclusions contained below, Huawei Technologies Co., Ltd. (Huawei for short) 
warrants its access terminals ("Products") to be free from defects in materials and 
workmanship under normal consumer usage for one year from the date of purchase of the 
product ("Warranty period"). During the warranty period, a Huawei authorized service 
partner shall remedy defects in materials and workmanship free of charge.  
 
Special Notice: 
1. The warranty card shall be applicable only after being stamped by the dealer.  
2. The warranty card must be preserved in good condition and free of any scratch or 
alteration.  
3. To claim such service for defects that are not included in the following exclusion terms, 
the warranty card and the invoice that records that product serial number shall be 
presented to a Huawei authorized service partner. 
 
Exclusions: 
In any of the following cases, the warranty card becomes unenforceable or inapplicable 
without prior notice:  
1. The defects are caused by improper handling in transportation and assembly.  
2. The defects are caused by the fact that the product is dismantled or altered by anyone 
that is not from a Huawei authorized service partner.  
3. The defects are caused by the fact that the product is used in a harsh environment that 
is not suitable for the operation of the product.  
4. The defects are caused by any force majeure including but not limited to fire, earthquake, 
lightning, and tsunami.  
5. The defects are caused by the fact that the product is used or handled incorrectly, 
roughly or not as instructed in the applicable User Guide.  
6. The normal wear and tear, including but not limited to the normal wear and tear of the 
shell and the power module, shall not be covered by the limited warranty.  
7. The warranty card is altered or illegible, or the product serial number recorded on the 
warranty card is inconsistent with the actual one imprinted or labeled on the product. 
 
In any case that is not covered by this limited warranty or should the warranty expire, 
Huawei shall charge for the service(s) claimed for the products if the product is still 
remediable. Huawei reserves all rights to interpret this limited warranty.  

Summary of Contents for EchoLife HS8245W





















Reviews: