EDGE U0-6 Simplified Maintenance Manual
7 Disassembly Procedure
Issue 1.0 (2013-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
31. Release the BTB connector of the battery, remove the
battery, and clean the adhesive residue from the battery
compartment.
Place the removed battery in an insulated
pallet and scrap it.
Make sure the removed battery is not
reused. Use a marker to mark an X on both sides of the
battery or make other signs that indicate the battery is to
be scrapped.
32. Release the receiver FPC, and use a coaxial
cable screwdriver to release the connectors for the
coaxial cable. Apply force in the vertical direction
to avoid damaging the connectors for the coaxial
cable.
33. Release the LCD BTB connector from the PCBA.
34. Pry the motor up using the tweezers.
35. Slightly remove the two cameras from the PCBA.
Do not damage surrounding components.
36. Slightly pry the buckles of the main antenna to
lift the PCBA up.