eSpace 6805 IP Phone
Administrator Guide
3 Configuration and Loading Files
Issue 01 (2014-01-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
55
When eSpace 6805 obtain IP addresses using DHCP, Option 42 supported by the DHCP
server can be used to automatically deliver the NTP server address. To achieve this, set
Allow
DHCP Option 42 to override NTP server
to
Yes
.
3.4.4 Configuring the Manager and Secretary Service
After the manager and secretary service is enabled, a line of a manager can be bound to a line
of the manager's secretary. When the manager's phone has an incoming call, the secretary's
phone rings, and the indicator for the corresponding line of the manager blinks. After
answering the call, the secretary can dial the manager's private phone number to forward the
call to the manager.
The following describes the manager and secretary service in the situation that a manager and
a secretary are involved.
Prerequisite
Two lines have been configured for the manager's phone. For details, see Individual
Account Configuration.
Configured as an external line, line 1 is used by external users to call the manager and is
bound to the secretary's phone. Line 2 is configured as a private line and is used by the
secretary to call the manager.
Line 1 has been configured for the secretary's phone. For details, see Individual Account
Configuration.
The manager and secretary service has been configured for both the manager's phone and
the secretary's phone. For details, see the
eSpace U19xx Unified Gateway Product
Documentation
.
Configuring the Manager's Phone
1.
Access the Web configuration page of the manager's phone.
2.
On the
Settings
>
Programmable Keys
page, set account 1 to a shared line, as shown in
Figure 3-43
Setting the shared line for the manager's phone
3.
After the configuration is completed, click
Save and Apply
.
----End
