EchoLife User Manual
4 Configuring the eSpace 6850
20
Field
Description
IP Address
The eSpace 6850 operates in two modes:
z
DHCP/PPPoE Mode:
All the field values for the static IP mode are not available
even though they are stored in the Flash memory. The
eSpace 6850 acquires its IP address from the first DHCP
server that the eSpace 6850 detects on its LAN. To use the
PPPoE feature, set the PPPoE account. The eSpace 6850
establishes a PPPoE session if any of the PPPoE fields are
set.
Host Name and Domain Name: The special DHCP options
that are added to the DHCP Discover and DHCP Request
after configuration.
Preferred DNS: The eSpace 6850 uses the DNS server if
Preferred DNS
is configured
z
Static IP
Mode: Configure all of the following fields:
IP
address
,
Subnet Mask
,
Gateway
,
Default Router IP
address
,
DNS Server 1
(primary), and
DNS Server 2
(secondary). The fields are set to
0
by default except that the
IP address is set to
192.168.0.160
by default.
802.1X mode
This parameter is set to perform the 802.1X authentication
when the IP phone is connected to a switch. You can click
Disable
to disable the authentication function, and click
EAP-MD5
to perform the registration authentication.
z
Identify
ID used during the 802.1x authentication
z
MD5 Password
MD5 password used during the 802.1X authentication
Iine Keys (1-4)
This parameter is set for specifying function modes of line keys.
By default, the value of
Key Mode
is
Line
, which is used by
common lines. If the value of
Key Mode
is
Shared Line
, it
indicates that the BroadSoft SCA functions are enabled and that
accounts scattered in various areas can share the line.
Multi-Purpose
Keys
The optional values are
Speed Dial
,
Busy Lamp Field(BLF)
,
Presence Watacher
,
eventlist BLF
,
Speed Dail via active
account
, and
Dial DTMF
.
Each key corresponds to an account, that is, a user number is set
for each key.
