EchoLife User Manual
5 Using the eSpace 6850
27
The following is an example.
z
10.10.10.2 calls 10.10.10.3 — dial
#3
, followed by SEND.
z
10.10.10.2 calls 10.10.10.23 –– dial
#23
, followed by SEND.
z
10.10.10.2 calls 10.10.10.123 –– dial
#123
, followed by SEND.
If the SIP server is configured, a direct IP-IP call still works. If you use the
STUN, the direct IP-IP call also uses the STUN. Set
Use Random Port
to
No
when completing direct IP calls.
Answering a Call
z
An incoming call: The phone rings. The corresponding account LINE
x
blinks. Pick
up the handset, press
, enable the headset, or press the blinking LINE
x
key to
answer the call.
z
Multiple incoming calls: The call waiting tone is played. The next available line
will blink in red. Answer an incoming call by pressing the
LINEx
key.
Do-Not-Disturb
To block all incoming calls, you can enable the Do-Not-Disturb (DND) function. The
phone will not ring when an incoming call comes.
Use either of the following methods to enable DND function:
Method 1:
When the phone is in idle mode, press
DND
to enable the DND
function and
press
DND
again to disable the DND function.
Method 2:
Toggle the DND function as follows:
Step 1
Press
MENU
.
Step 2
Select
Preference
by pressing the arrow keys, and then press
MENU
.
Step 3
Select
Do Not Disturb
by pressing the arrow keys and press
MENU
.
Step 4
Select
Enable DND
or
Disable DND
and press
MENU
.
Call Waiting/Call Holding
z
Hold: Keep a call on hold by pressing
HOLD
.
z
Resume: Resume the call by pressing the corresponding LINEx key with a blinking
LED.
z
Multiple calls: Automatically keep an active call on hold by selecting another
available LINE
x
key or answering another call. If an incoming call comes when all
lines are in use, the call waiting tone (discontinuous tone) is displayed.
