27.1 Wireless and Network Settings
27.1.1 Ethernet
Step 1
Tap
. On the
APPLICATION
tab, tap
Settings
.
Step 2
In the
WIRELESS & NETWORKS
area, tap
Ethernet
.
On the Ethernet settings screen, you can set the IP phone's IP address and enable the proxy
function to facilitate access to websites. For detailed operations, consult your system
administrator.
----End
27.1.2 Wi-Fi
Turning Wi-Fi on and Connecting to a Wi-Fi Network
Step 1
Tap
. On the
APPLICATION
tab, tap
Settings
.
Step 2
In the
WIRELESS & NETWORKS
area, tap the Wi-Fi switch to turn Wi-Fi on.
The IP phone automatically scans and lists all available, in-range Wi-Fi networks.
Step 3
Select a Wi-Fi network and tap
Connect
.
To connect to an encrypted Wi-Fi network, you must enter the correct password.
----End
Manually Adding a Wi-Fi Network
Step 1
In the
WIRELESS & NETWORKS
area, tap the Wi-Fi switch to turn Wi-Fi on.
Step 2
In the Wi-Fi network list, tap
.
Step 3
Complete the required settings in the
Network SSID
and
Security
areas, and set relevant
parameters (for example, the password) following the on-screen instructions.
Step 4
Tap
Save
.
----End
Connecting to a Wi-Fi Network Using WPS PIN
You can use WLAN Protected Setup (WPS) to simplify connection to a Wi-Fi network. Simply
enter a PIN, and a secure Wi-Fi connection is then automatically set up. You do not need to
perform complex configurations on the management software for the Wi-Fi hotspot (for
example, a wireless router).
Step 1
In the
WIRELESS & NETWORKS
area, tap the Wi-Fi switch to turn Wi-Fi on.
eSpace 8950 IP Phone
User Guide
27 Settings
Issue 03 (2014-10-16)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
92
