eSpace IAD
Troubleshooting
4 FA Qs
Issue 02 (2012-02-29)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100
For IAD101H/102H/104H, use a network cable to connect a PC to the LAN port on the
IAD, and enter
telnet 192.168.100.1
in the
Run
dialog box to log in to the IAD. The
default user name is
root
, and the default password is
admin
. In the privilege mode, run
the
display ipaddress
command to display the IP address. For details, see the
eSpce IAD
Product Documentation
.
4.1.3 How Do I View the MAC Address of the IAD
Q: How do I view the MAC address of the IAD?
A: You can view the MAC address in either of the following ways:
Log in to the web management system, and choose
Basic Configuration
>
Network
Parameter
.
Log in to the CLI, and run the
enable
and
configure terminal
commands in sequence to
enter the global configuration mode. Then run the
display mac-address
command.
IAD101H/102H/104H supports only the CLI mode.
4.1.4 How do I view the physical sequence number of the IAD
Q: How do I view the physical sequence number of the IAD?
A: You can view the physical sequence number in either of the following ways:
Log in to the web management system, and choose
Advanced Configuration
>
UCEMS Configuration
.
Log in to the CLI, and run the
enable
and
configure terminal
commands in sequence to
enter the global configuration mode. Then run the
display physical-serial-num
command.
IAD101H/102H/104H supports only the CLI mode.
4.1.5 How do I view the software version of the IAD
Q: How do I view the software version of the IAD?
A: You can view the software version in either of the following ways:
Log in to the web management system, and choose
Basic Configuration
>
Version
Information
.
Log in to the CLI, and run the
enable
and
configure terminal
commands in sequence to
enter the global configuration mode. Then run the
display version
command.
IAD101H/102H/104H supports only the CLI mode.
4.1.6 How do I view the system information
Q: How do I view the system information?
A: For details, see
Maintenance
>
Viewing the System Information
in the
eSpce IAD
Product Documentation
.