2
1. (Optional, for secured installation) Determine the position for installing the cabinet. Mark
mounting holes based on the marking-off template, which is delivered with the battery cabinet.
2
Installing a Battery Cabinet
2. (Optional, for secured installation) Use a hammer drill to drill holes for installing expansion bolts
and then install four expansion bolts in the holes. Remove the bolt, spring washer, and flat washer.
3. Move the cabinet over its castors to the installation position.
4. Lower the four leveling feet at the bottom of the battery cabinet by using a wrench until all the four
castors at the bottom hang in the air and the leveling feet bear all of the cabinet weight.
5. Check the cabinet levelness using a level. If the cabinet is not leveled, adjust the leveling feet.
Unit: mm
Top view
