Huawei FT2050 User Manual Download

Page: 4 / 16

No.

Item

9 Battery

indicator

If the FWT sources its power only from the battery (the power adapter is not
connected), the following indicators apply:



Steady blue: The battery is full.



Steady red: The battery is at medium capacity.



Blinking red: The battery is low and must be charged.

If the FWT is connected to the power adapter with the battery inside, the following
indicators apply:



Steady red: The battery is being charged.



Steady blue: The battery is fully charged.

10 Power

indicator

Steady blue: The FWT is connected to the power adapter.

11 Working

status

indicator

Steady blue: The FWT is working.

Rear View

No.

Item

No.

Item

1 Wall-mounting

brackets

4 Battery

port

User Identify Module (UIM) card
slot

5 Battery

cover

3 Battery

compartment

Installation



Note:

Before installing or removing the battery, indoor antenna, or UIM card, ensure that
the FWT is powered off and disconnected from the power adapter.

Summary of Contents for FT2050

















Search results

Summary of Contents for FT2050

Reviews:

Related manuals for FT2050

Brands by name

Popular brands

Huawei FT2050, User Manual

Search results

Summary of Contents for FT2050

Reviews:

Related manuals for FT2050

Brands by name

Popular brands