C
Cleaning Pre-fab. Modules
Prerequisites
Pre-fab. modules have been installed.
Preparations
Tools: long-handled soft brush, barrel, vacuum cleaner, cotton cloth
Materials: detergent and clean water
Skill requirement: common technician
Procedure
Step 1 Clean the interior of a pre-fab. module.
1. Clean metal scraps in all holes drilled inside the pre-fab. module.
2. Clear all smudges inside the pre-fab. module.
3. Clean visible rubbish and dust inside the pre-fab. module.
Step 2 Clean the exterior of a pre-fab. module.
1. Clean up sundries (such as iron scraps) on the pre-fab. module exterior.
2. Clear dust, rain marks, or stains on the outer panels of the pre-fab. module
using a long-handled soft brush dipped with alkaline or neutral detergent.
3. Wash the pre-fab. module with clean water.
NO TE
It is recommended that you clean the pre-fab. modules once every quarter.
----End
FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
C Cleaning Pre-fab. Modules
Issue 01 (2021-04-20)
Copyright © Huawei Technologies Co., Ltd.
121