FusionModule1000B Air-Cooled IT Solution
Maintenance Guide
4 Routine Maintenance
Issue 02 (2017-01-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32
Item
Method
Expected
Result
Troubleshooting
or corrosion.
Sealing
materials
between
combined
containers
Check the sealing
materials between
combined
containers.
The sealing
materials are
intact and have
not aged.
Replace by following instructions in
the
Installing Sealing Materials
Between Combined Containers
section in the installation guide for
the solution in use.
External
cable trays
Check whether the
cables and cable
trays are intact.
Cables and
cable trays are
intact without
serious aging.
Replace seriously aged cables. For
details, see the installation guide for
the solution in use.
External
environmen
t of
containers
Check whether
hazards or
potential hazards
exist around the
containers.
No hazard or
potential
hazard exists
around the
containers.
Take measures to handle potential
hazards.
Check whether
obvious rubbish
exists around the
containers.
No obvious
rubbish exists
around the
containers.
Clean the rubbish.
Check whether the
ambient
temperature,
humidity, and solar
radiation outside
the containers meet
requirements.
The ambient
temperature,
humidity, and
solar radiation
requirements
for the
FusionModule
1000 are as
follows:
Temperatur
e: –40°C to
+52°C.
Humidity:
5%–95%
RH
Solar
radiation: ≤
1120 W/m
2
For details, contact Huawei
technical support.