3
1
Installing the Cabinet
1. Determine the cabinet position based
on the engineering layout diagram.
2. Place the cabinet at the correct
installation position.
3. Level the cabinet using a wrench.
•
Use a measuring tape to check
that the vertical distance between
the top of the 2000 mm high
cabinet and the floor is 2000 mm
(+3 mm). Then use a level to
check that the cabinet is level.
•
Do not remove the anchor bolts.
Otherwise, rework is required if
the cabinet height does not meet
requirements.
2
Installing an Indoor Unit
1. Remove filler panels.
2. Push the indoor unit into the bottom of the cabinet along the guide rails.
Hardware Installation
