4.4 Verifying the Installation
Cabinet Installation Check
Table 4-15 Cabinet installation check items
No.
Check That
Check Result
1
The cabinet position is consistent with the
equipment room layout diagram.
□ Passed □ Failed
2
All bolts are tightened, especially the bolts used
for electric connection. Flat washers and spring
washers are installed properly.
□ Passed □ Failed
3
The cabinet is clean and free of dust and other
materials.
□ Passed □ Failed
4
The cabinet is clean and complies with dustproof
requirements.
□ Passed □ Failed
5
The paint on the cabinet exterior is intact.
Promptly repaint the cabinet exterior if necessary
to prevent corrosion.
□ Passed □ Failed
6
The cabinet door and lock work properly.
□ Passed □ Failed
7
All labels are correct, clear, and complete.
□ Passed □ Failed
8
The cabinet has no waste tape, cable ties, paper,
or packing materials around it.
□ Passed □ Failed
9
All components are properly installed and no
component is left onsite.
□ Passed □ Failed
10
Block empty cable holes using plugs or lids.
□ Passed □ Failed
Cable Installation Check
Table 4-16 Cable installation check items
No.
Check That
Check Result
1
All cable joints are secured properly, especially the
cable joints between network cables.
□ Passed □ Failed
2
Exposed parts near the wiring terminals and lugs
are wrapped in PVC insulation tape or heat
shrinking tubing.
□ Passed □ Failed
FusionModule500 Smart Mini Data Center
User Manual
4 Installation Guide
Issue 02 (2020-12-25)
Copyright © Huawei Technologies Co., Ltd.
150
