Version 2.1 (May 2016)
33
Picture 3-26 network status
Wireless Connection Setup
4.
4.1. Setting Up a Wireless Connection Using the
WPS Button
Push the WPS button once, to quickly set up a wireless connection between the HA35 and
any WPS-capable device.
Before you set up a wireless connection using the WPS button, verify the following:
The wireless network security mode of the HA35 is WPA2-PSK or WPA-PSK/WPA2–
PSK.
The wireless device (laptop, tablet, or mobile phone) to connect to the HA35 is WPS-
capable.
1.
Press the WPS button on the wireless device to start the WPS negotiation. For details,
see the user guide for the wireless device.
2.
Within 2 minutes, press and hold the WPS button on the HA35 for 1 second or more.
When the WPS indicator of the HA35 is on and then off, a connection between the HA35
and wireless device has been set up.