Step 1
Click
Advanced
>
PIN
in the navigation tree to display the
PIN
Page.
Step 2
Enter the original PIN number in the
PIN
text box.
Step 3
Click the
Submit
button to finish the settings on the
PIN
Page.
Use the default values for the other parameters. In general, they do not need
to be configured.
3.2
Configuring the DSL uplink
By configuring the HG622 and your computer, you can choose any of the following
methods to surf the Internet:
z
Using the Embedded PPP Dial-Up Software on the HG622
z
Using the PPP Dial-Up Software on Your Computer
Using the Embedded PPP Dial-Up Software on the HG622
If you select this method for accessing the network, the HG622 starts to set up a dial-up
connection automatically after the startup. You can access the network after you power
on your computer. You do not need to install any special dial-up software on your
computer or perform dial-up operations on your computer. To configure the HG622 and
your computer for the network access, do as follows:
Step 1
Log in to the Web-based configuration utility of the HG622.
Step 2
Configure the ATM PVC.
1.
In the navigation tree, choose
Basic
>
ATM
.
2.
Enter
VPI/VCI
provided by the Internet Service Provider (ISP).
3.
Select
EoA
from the
DSL link type
option button.
4.
Click
Submit
.
Step 3
Set WAN parameters.
1.
In the navigation tree, choose
Basic
>
WAN
.
2.
Select a PVC from the
Layer2 interface
drop-down combo box.
z
The name of this PVC should begin with
atm
.
z
The DSL link type of this ATM PVC should be
EoA
.
3.
Select
Enable
for WAN connection.
4.
Select a service from the
Service list
drop-down list box.
5.
Select a LAN interface from the
Port binding
check box.
6.
Select
Route
from the
Connection mode
drop-down list box.
7.
Select
PPPoE
from the
Connection type
option button.
8.
Enter the
User name
and
Password
provided by the ISP.
9.
Click
Submit
.
8