No.
Indicator
Status
Description
On
z
The HG622 works in routing mode.
z
The WAN connection is set up.
z
No data is being transmitted.
Blinking
z
The HG622 works in routing mode.
z
The WAN connection is set up.
z
Data is being transmitted.
3 INTERNET
Off
z
The HG622 works in bridge mode or in
routing mode.
z
No WAN connection is set up.
On
z
The wireless network function is enabled.
z
No data is being transmitted through the
WLAN.
Blinking
z
The wireless network function is enabled.
z
Data is being transmitted through the
WLAN.
4 WLAN
Off
The wireless network function is disabled.
On
A wireless connection is set up between the
HG622 and a wireless client through the WPS
function.
This state lasts 300s.
Blinking
The HG622 is attempting to set up a wireless
connection with a wireless client (such as a
PC on which a wireless network adapter is
installed) through the WPS function.
This state lasts no more than 120s.
5 WPS
Off
The WPS function is disabled.
On
The Ethernet connection is set up.
Blinking
Data is being transmitted through the Ethernet
interface.
6–9 LAN1–LAN4
Off
The Ethernet connection is not set up.
On
The USB connection is set up.
Blinking
Data is being transmitted through the USB
port.
10 USB
Off
The USB connection is not set up.
20
