7
Step 6
Check that the wireless name you set is correct, and then click
Submit
.
Then check the status of the
Internet
indicator. When the
Internet
indicator
turns green, you can access the Internet.
The preceding operations need only be performed on a computer once. The
next time when you power on the computer, you can access the Internet without
any other configurations.
3 Setting Up a Wireless Connection
If a wireless network adapter is installed on your computer, you can connect
your computer to the HG630a over a wireless connection.
The HG630a's wireless network function is enabled by default. To check the
function status, see section 5.2 "
Enabling or Disabling the Wireless Network
Function
".
There are two methods for setting up a wireless connection between the
HG630a and your computer.
3.1 Setting Up a Wireless Connection With the
WPS Button
The HG630a supports the Wi-Fi Protected Setup (WPS) function in Push
Button Configuration (PBC) mode. If your computer also supports the WPS
function, do the following to connect your computer to the HG630a wirelessly:
Step 1
Press and hold the
WPS
button on the HG630a's side panel for at
least 1 second.
The method for installing the wireless adapter and its driver varies by
vendor. For details, see the installation guide provided by the vendor
of your wireless adapter.
Windows 7 supports the WPS function. Windows XP supports the
WPS function using the wireless network adapter.
