12
Remember the new wireless network name and password you just set. You will
be prompted to enter this password when connecting wireless devices, such as
a computer, to the HG630a's wireless network.
4.4
Changing the IP Address Used to Log
In to the
Web-based Configuration Utility
To change the login IP address and make it easier to remember:
Step 1
Log in to the HG630a's web-based configuration utility.
Step 2
Choose
Basic
>
LAN
to display the
DHCPv4 Server
tab.
Step 3
In the
LAN Host Settings
section, enter a new IP address in
IP
address
. Then enter a new subnet mask in
Subnet mask
.
Step 4
Click
Submit
to save the changes.
If you forget the wireless network name and password, log in to
the web-based configuration utility, and set a new name and
password. Alternatively, you can restore the HG630a to its default
settings. The name and password are then restored to the values
printed on the label on the HG630a's rear panel.
To log in to the web-based configuration utility after you change
the IP address successfully, you need to launch the Internet
Explorer, and then enter the new IP address in the address bar.
Ensure that the IP address of the computer is in the same network
segment as that of the HG630a so that the computer can access
the web-based configuration utility.
