12
Step 4
In
WAN device
, select the type for your device, and enter the
user name and password provided by your service provider
for dial-up connections in
User name
and
Password
.
Step 5
Click
Next
.
Step 6
In
SSID
and
WPA pre-shared key
, set a wireless network
name and password, and click
Next
.
Step 7
Confirm the information you set and then click
Submit
.
Then check the status of the
Internet
indicator. When the
Internet
indicator turns green, you can access the Internet.
The preceding operations need only be performed once. The next time
you power on the computer, you can access the Internet without any
other configurations.
3.3 Enabling Bridge Mode
If you select this method for accessing the network, you need to install and
configure the dial-up software on your computer. In addition, you need to
perform dial-up operations on your computer upon each startup.
To configure the HG630b and your computer for the network access bridge
mode, do as follows:
Step 1
Set the working mode of the HG630b to
Bridge
.
1.
Log in to the web management page.
2.
In the navigation tree, choose
Basic
>
WAN
.
3.
Click
New
.
4.
Select
Enable
for
WAN connection
.
5.
Select
INTERNET
from the
Service list
.
The default SSID and WLAN Key printed on the HG630b's rear
panel are unique and secure. If you do not want to change them,
just turn the WLAN switch on.