4
3
Setting Dial-Up Connection
Parameters
The HG633 provides an intuitive web management page where you can view or set
the HG633 parameters.
1.
Open a browser. In the address box, enter
192.168.1.1
. Press
Enter
.
2.
Enter the login user name (
user
by default) and password (
HuaweiUser
by
default). Click
Login
.
3.
Choose
Home
tab, click
Start Wizard
, and select your Internet connection mode.
Refer to the following table to configure the network connection.
Scenario
Connection Type
When you are unsure of the network connection
you subscribed to, you can select this mode that
the device will detect the network connection
automatically.
Connect automatically
The account name and password are provided by
your Internet Service Provider (ISP).
Connect with user account
No parameter is provided by your ISP. The IP
address is automatically assigned by the ISP.
Connect without user account
The user name and password are provided by ISP.
Set up a dial-up connection on one computer
only.
Connect with another modem
4.
Set network access parameters.
If you selected
Connect with user account
,
enter the parameters provided by
your ISP and click
Next
.
If you selected
Connect without user account
or
Connect with another
modem
, click
Next
.
Before you log in to the HG633 web management page, ensure that the computer
used for the login is connected to the HG633 and has been configured to
automatically obtain an IP address or assigned with a static IP address.
To protect against unauthorized access, change the user name and password after the
first login. When modify password successfully, this page will jump to the login page,
use the new password to log in.