Huawei HG635, Quick Start Manual

3 

Indicator

State 

Description  

user name and password for Broadband dial-up is 

ineffective).  

The Internet connection is failure in DHCP mode.  

Green Blinking 

The Internet connection is successfully established 

and data is being transmitted

WLAN  

Green On  

2.4G Wi-Fi connection is set up.  

5G Wi-Fi connection is set up.  

Both 2.4G &5G Wi-Fi are set up.  

The HG635 is connected to a wireless client using the 

Wi-Fi Protected Setup (WPS) function.  

Green Blinking  

(1 Hz)  

A wireless client, such as a computer installed with 

a wireless network adapter, is connecting to the 

HG635 using the WPS function.  

This process lasts for no longer than 120 seconds.  

Green Blinking  

(2 Hz)  

The WLAN connection is set up, and data is being 

transmitted.  

LAN 

Green On  

At least one Ethernet port is connected to an Ethernet 

device (such as a computer) with a network cable, but 

no data is being transmitted.  

Green Blinking  

At least one Ethernet port is connected to an Ethernet 

device with a network cable, and data is being 

transmitted.  

USB 

Green On 

The USB port is connected to an USB device, but 

no data is being transmitted. 

Green Blinking

The USB port is connected to an USB device, and 

data is being transmitted.

3 

Setting Dial-Up Connection Parameters 

The HG635 works in PPP mode by default, and starts to set up a dial-up connection 

automatically after starting up, meaning you do not need to install dial-up software or perform 

dial-up operations on your computer. 
To set up a dial-up connection to access the Internet: 

Step 1

Open a browser. In the address box, enter 

http://192.168.100.1

. Press 

Enter

 to 

access the web management page. 

Step 2

Enter the login user name (

admin 

by default) and password (the same as

WLAN 

Key

which printed on the HG635’s rear panel). Click 

Login

. 

To protect against unauthorized access, change the user name and password after the 

first login. For details, see Maintenance Guide. 

Step 3

Click 

Start Wizard

 to display the

Wizard

tab. 

Step 4

Select 

Connect automatically

, and click 

Next

.