z
Using the PPP Dial-Up Software on Your Computer
Using the Embedded PPP Dial-Up Software on the HG655d
If you select this method for accessing the network, the HG655d starts to set up a
dial-up connection automatically after the startup. You can access the network after you
power on your computer.
To configure the HG655d and your computer for the network access, do as follows:
Step 1
Log in to the web page.
Step 2
Configure the PTM PVC and ATM PVC.
1.
In the navigation tree, choose
Basic
>
ATM
.
2.
Click
New
.
3.
Enter VPI and VCI in the
VPI/VCI
text box provided by the Internet
Service Provider.
4.
Select
EoA
from the
DSL link type
option button, and keep the default
settings of other parameters.
5.
Click
Submit
.
Just keep the default settings for PTM settings.
Step 3
Enable the embedded dial-up function.
1.
In the navigation tree on the left of the web page, choose
Basic
>
WAN
.
2.
Click
New
.
3.
Select a PVC from the
Layer2 interface
drop-down combo box.
z
The HG655d supports ADSL/VDSL compliance uplink.
z
When choose the ADSL uplink mode, the name of PVC should be
composed by the value of VPI and VCI. When choose the VDSL
uplink mode, the name of PVC should begin with
ptm
.
4.
Select
Enable
check box for
WAN connection
.
5.
Select
VOICE_TR069_INTERNET
from the
Service list
drop-down
combo box.
6.
Select
Route
from the
Connection mode
drop-down combo box.
7.
Select
PPPoE
option button for
Connection type
.
8.
Select
Enable
check box for
NAT
.
9.
Enter the user name and password that are provided by the ISP in the
User name
and
Password
text boxes, and keep the default settings of
other parameters.
10.
Click
Submit
.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer once only. The next time
when you power on your computer, you can surf the Internet without any configuration.
12
